Industrial endoscopes are mainly composed of endoscope camera systems, image transmission systems, video display systems, etc. Industrial endoscopes can be connected with cameras, video cameras or electronic computers to form photographic, video and image processing systems to perform viewing Field target monitoring, recording, storage and image analysis. Provide a good guarantee for diagnosis and processing. So what are the environmental requirements for industrial endoscope inspection?
Environmental requirements for industrial endoscope inspection:
Generally speaking, industrial endoscope testing does not have high requirements on the environment. Only strong electromagnetic interference or severe voltage fluctuations around the testing site will have a negative impact on the testing equipment; at the same time, the environmental temperature and humidity should meet the requirements of the equipment, otherwise extremely It is easy to cause damage to industrial endoscope equipment. For example, too low temperature will cause the flexible probe to become hard and brittle, and too high temperature will affect the heat dissipation of the equipment. Too bright light will reduce the resolution of the human eye and affect the contrast of the detected image. Generally, the detection is not allowed under strong light such as direct sunlight. You should try to choose a soft and quiet indoor environment.
In some cases, even industrial endoscopes cannot perform measurements in the pipeline, and we have to stop testing when we encounter too harsh conditions. For example, when the tube endoscope lens cannot walk in the pipeline or the push rod cannot be advanced in the pipeline, we cannot use the endoscope to prevent damage to the equipment. When the tube endoscope lens is stained with dirt, it is not suitable to continue the detection, which will affect the detection result, and the cleaning operation should be carried out in time.
Industrial endoscopes can be used for inspection and observation of high temperature, toxic, nuclear radiation, and places that cannot be directly observed by the human eye. They are mainly used for automobiles, aero engines, pipelines, mechanical parts, etc., and can be used without disassembly or destruction of assembly and equipment. Realize non-destructive testing when the operation is stopped.
The above briefly introduces the environmental requirements of industrial endoscope testing, please consult us for details!
